Knifemaking

These copper handle spacers are precision water jet cut. This is nice because copper is so soft that cutting it in this thickness by hand can bend it easily. Designed to be installed as decorative spacers on each side of flat scale knife handles, these...

This is a nice Buck Knives made leather sheath. Although it was originally produced for a specific model, it will also work great for any knife that will fit into it. Please refer to the dimensions below to see if your knife will fit the sheath...

This is a unique set of India Sambar Stag slabs for your knifemaking or other craft project. This listing is for the actual pieces pictured. Thickness varies from approximately from 3/16"- 5/16" and is 2 7/8" long. Pre-embargo and difficult to...

This is a unique set of India Sambar Stag slabs for your knifemaking or other craft project. This listing is for the actual pieces pictured which is a lot of two. Thickness varies from approximately from 3/16"- 5/16" and is 2 7/8" long. Pre-embargo and...

This is a unique set of India Sambar Stag slabs for your knifemaking or other craft project. This listing is for the actual pieces pictured. Thickness and length vary please see dimensions. The overall size given in title is the approximate overall size...

This is a premium lot of 60 plus Schrade LOCKBACK knife making blade blanks. Less than $1 a piece! You will find only lockback blades of various lengths in this special lot. These blades are "new" old stock, made at the Schrade factory in Ellenville, NY,...

These are nice Nickel Silver knife handle spacers. They are new water jet cut and just need a fitting and buffing. Made in Spokane WA, USA. Overall exterior size: 0.040" thick x 15/16" wide x 1 5/8" tall. Approximate cutout in center: 0.25" X 0.75". Made...

This is a lot of 3 Schrade tanto blades. Made of superior ATS-34 and finished for a liner locking knife they would be great for your next knifemaking project or as a replacement for the original knife. It is unused old stock, made at the Schrade factory...

These are knifemaking Brass handle spacers. They are new water jet cut and just need a fitting and buffing. Made in Spokane WA, USA. Overall exterior size: 0.040" thick x 15/16" wide x 1 5/8" tall. Approximate cutout in center: 0.25" X 0.75". Made to fit...

This is a lot of 3 Schrade tanto blades. Made of Schrade + stainless steel and finished for a liner locking knife they would be great for your next knifemaking project or as a replacement for the original knife. It is unused old stock, made at the...

This is a lot of 5 Schrade steak knife making blade blanks. These serrated blades are "new" old stock, made at the Schrade factory in Ellenville, NY, before it closed in 2004, these are unused. May have shop wear and dirty/greasy, otherwise they are...

This is a lot of 8 Schrade MA6 fillet knife making blade blanks. These blades are "new" old stock, made at the Schrade factory in Ellenville, NY, before it closed in 2004, these are unused and unsharpened. May have shop wear and dirty/greasy, otherwise...

This is a lot of 60 plus miscellaneous Schrade knife and tool blanks: guthook, partially serrated, etc. Less than $0.50 a piece! These blades are "new" old stock, made at the Schrade factory in Ellenville, NY, before it closed in 2004, these are unused...

This is nice piece of O1 Tool steel blade blank for your knife making project, or any metalworking project. It measures 3" wide x 11-3/8" long x 0.3125". Good blanks with shop wear. Model: Ol Tool Steel Condition: This is a unused blade blank. Has...

This is a lot of 2 Schrade blades made of high carbon steel. Just needs some fabrication and a handle to be completed into a beautiful blade. Comes with blade guard. Model: Schrade Fixed Blade Parts Condition: New Made in United States Folder...

This is a great stainless steel Schrade knife guard in unused old stock condition from the Schrade factory at Ellenville, NY which closed in 2004. You can easily grind the opposite side to a point like the other, or even grind the top off to make a...

This is a premium lot of 60 plus Schrade SLIPJOINT knife making blade blanks. You will find only slipjoint blades of various lengths in this special lot. These blades are vintage old stock, made at the Schrade factory in Ellenville, NY, before it closed...

This is a nice nickel silver guard, designed for a Schrade Bowie blade (knife not included, shown to display finished look), but will work great for any 3/16" or thicker knife blade. Made in Spokane WA, USA. Fits 3/16" thick blade (Click here if you need...

This is a unique set of elk antler slabs for your knife making, pistol grip, or craft project. They are sanded flat on the back. The overall size given is the approximate overall size of the smallest side of the pair (not counting the stub point...

This is a unique set of elk antler slabs for your knife making, pistol grip, or craft project. They are sanded flat on the back. The overall size given is the approximate overall size of the smallest side of the pair (not counting the stub point...

This is a unique set of elk antler slabs for your knife making, pistol grip, or craft project. They are sanded flat on the back. The overall size given is the approximate overall size of the smallest side of the pair (not counting the stub point...

Nice glass breaker part, designed to be screwed into the end of a flashlight, knife, or any other thing you might imagine. USA machined = quality! 440C Stainless Steel Glass Breaker part. Made in the USA. Overall size: 5/16" diameter x 5/8" long...

This brass knife guard was precision cut by a water jet. To use, it just needs fit and buffed. Made in Spokane WA, USA. It has an overall exterior size of 1/8" thick x 5/8" wide x 1 7/8" tall. Approximate cutout in center: 0.136" X 0.836". Made to fit...

This is a nice nickel silver guard, designed for the Marbles Trailmaker blade (knife not included, shown to display finished look), but will work great for any 1/4" or thicker knife blade. These are new water jet cut, needs fit and buffed, made in...