Knife Making

This is a unique set of stag antler slabs for your knife making, pistol grip, or craft project. They will need flat ground to fit your knife handle properly. The measurements are 3.25" long x 0.75" wide, and both pieces put together measure approximately...

This is a unique set of stag antler slabs for your knife making, pistol grip, or craft project. They will need flat ground to fit your knife handle properly. The measurements are 3.25" long x 0.75" wide, and both pieces put together measure approximately...

This is a unique set of stag antler slabs for your knife making, pistol grip, or craft project. They will need flat ground to fit your knife handle properly. The measurements are 3.25" long x 0.75" wide, and both pieces put together measure approximately...

This is a unique set of stag antler slabs for your knife making, pistol grip, or craft project. They will need flat ground to fit your knife handle properly. The measurements are 3.25" long x 0.75" wide, and both pieces put together measure approximately...

If you are searching for an excellent quality hunter knifemaking project look no further. This fixed knife was made in Seki, Japan by Nakamura circa 1980s for BST. It comes with aging tarnish on blade, but can wipe off nearly completely by hand (this...

This is stunning Bowie knife made circa 1980 by C. Jul. Herbertz (this one is unmarked but identical to the one we have for sale that is stamped). It features a sturdy mirror polished 6.375" long blade made of 440 Stainless steel and has a brass guard...

This is a Loveless inspired fixed knife blade blank made by Tak Fukuta in Seki, Japan for Explorer circa 1990s. It measures 8.325" long overall and the blade measures 4.125" long and is made of mirror polished 1/8" thick AUS-8. Blade only, no guard. Tak...

This fighting knife blade blank kit was made by Tak Fukuta in Seki, Japan circa 1980s and is stamped "Rosftrei" for market in Germany. The blade itself (from guard stop to tip) measures 5.125" long and is made of 440 Stainless and is 3/16" thick. The...

This is a well designed knife blade blank made by Tak Fukuta in Seki, Japan for Explorer circa 1980s. It measures 8.4" long overall and the blade measures 4.25" long and is made of polished AUS-8 at 0.140" thick and has a hidden tang. Blade only, no...

This is a knife blade blank made by Tak Fukuta in Seki, Japan circa 2004. It is identical to the AG. Russell 2004 which Tak also made. This AUS-8A blank measures 11.25" long overall and the blade measures 6.5" long. Blade only, no guard. Tak Fukuta was...

This is a well designed knife blade blank made by Tak Fukuta in Seki, Japan for Explorer circa 1980s. It measures 8.6" long overall and the blade measures 4.2" long and is made of polished AUS-8 just over 1/8" thick and has a tapered tang. Blade only, no...

This is a well designed knife blade blank made by Tak Fukuta in Seki, Japan for Explorer circa 1980s. It measures 8.6" long overall and the blade measures 4.2" long and is made of polished AUS-8 just over 1/8" thick and has a tapered tang. Blade only, no...

This is a well designed knife blade blank made by Tak Fukuta in Seki, Japan for Explorer circa 1990s. It measures 8.25" long overall and the blade measures 3.75" long and is made of polished AUS-8 just over 1/8" thick and has a tapered tang. Comes with...

This is a knife blank from the original run of 1226 and made in Seki, Japan circa 1980 by Tak Fukuta for Ka-Bar. It has the original Olean, NY tang stamp with stainless steel blade and comes with the guard and pommel and about half the handle with...

This is a knife blank from the original run of 1226 and made in Seki, Japan circa 1980 by Tak Fukuta for Ka-Bar. It has the original Olean, NY tang stamp with stainless steel blade and comes with the guard and pommel. Tak Fukuta was the first Japanese...

This is a knife blade blank made by Tak Fukuta in Seki, Japan for Junglee circa 2000. It measures 9.25" long overall (with handle) and the blade measures 5.2" long and is made of polished 5/32" thick ATS-34 and etched with JUnglee Tak Fukuta and 2000 in...

This is a Case XX 1990 LT216-5 knife unfinished blade blank. The blade measures 5.25" long and overall measures 9.25" and is just under 1/8" thick. It is satin finished stainless steel and is unsharpened with 1990 tang stamp...

This is a set of four standoffs and eight screws for the Buck 889 Strider. These are parts made for a custom Buck 889 Strider project from several years ago. An example of these on a customized 889 is shown in picture (not included). They are made of...

This is a Loveless inspired skinner knife blade blank made by Tak Fukuta in Seki, Japan for Explorer circa 1990s. Identical to the BH-60 also produced for Browning. It measures 8.75" long overall and the blade measures 4.375" long and is made of polished...

This is a knife blade blank made by Tak Fukuta in Seki, Japan for Mac circa 1990s. This blank measures 10.25" long overall and the blade measures 5" long and is made of AUS-8A. Measures just under 1/8" thick. Comes with wood scales, designed to have...

This is a Browning knife blade blank made in Seki, Japan circa 1990s. It measures 8.625" long overall and the blade measures 4.625" long and is made of AUS-8A. Specs Brand/Model: Browning Wasatch Guthook Skinner Made...

These are unfinished folding knife parts from the Seizo Imai factory in Seki, Japan made circa 1990s. The blade is rough ground and has been heat treated/hardened. It is made of ATS-34 and measures 3-7/16" long overall and measures 0.98" thick. This is...

These are unfinished folding knife parts from the Seizo Imai factory in Seki, Japan made circa 1990s. The blade is rough ground and has been heat treated/hardened. It is made of ATS-34 and measures 3-3/4" long overal land measures 0.99" thick. This is...

These are unfinished folding knife parts from the Seizo Imai factory in Seki, Japan made circa 1990s. The blade is rough ground and has not been heat treated/hardened. It is made of ATS-34 and comes with backspring and spacer. These need finished,...