Fixed Blade

This is a knife blade blank made by Tak Fukuta in Seki, Japan circa 1990s. This blank measures 7.25" long overall and the blade measures 3.25" long and is made of AUS-8A. Measures 0.91" thick. Tak Fukuta was the first Japanese member of the American...

This knife blade blank was made by Tak Fukuta in Seki, Japan circa 1980s, originally for Magnum and Tak Blade. It is made of 0.146" stainless steel. Tak Fukuta was the first Japanese member of the American Knife Maker's Guild, and apprentice to Bob...

This knife blade blank was made by Tak Fukuta in Seki, Japan circa 1980s, most likely for Explorer. It is perfect for a small knife, measuring 5" long overall with a 1.75" long blade. Made of 1/8" stainless steel. Blade is flat and will need ground. Tak...

This knife was made by Tak Fukuta in Seki, Japan circa 1980s for Explorer. It features an all stainless construction. The sheath is not original for this model, but it works well, with the blade going in on the bottom and then easily pulling up on the...

This is the Colt CT7, made by Tak Fukuta in Seki, Japan for Colt circa 1980s. It features a mirror polished stainless steel blade with serrations and guthook. Blade only, no guard. Tak Fukuta was the first Japanese member of the American Knife Maker's...

This is the Colt CT7, made by Tak Fukuta in Seki, Japan for Colt circa 1980s. It features a mirror polished stainless steel blade with guthook. Blade only, no guard. Tak Fukuta was the first Japanese member of the American Knife Maker's Guild, and...

This knife blade blank was made by Tak Fukuta in Seki, Japan circa 1980s for Winchester. The Stainless blade is a hefty 3/16" thick and is mirror polished and measures 8.125" long overall and the blade measures 3.625" long. Has a tapered tang. Tak Fukuta...

This knife blade blank was made by Tak Fukuta in Seki, Japan circa 1980s for Winchester. The Stainless blade is a hefty 3/16" thick and is mirror polished and measures 8.125" long overall and the blade measures 3.625" long. Has a tapered tang. Tak Fukuta...

This knife blade blank was made by Tak Fukuta in Seki, Japan circa 1980s for Winchester. The Stainless blade is a hefty 3/16" thick and is mirror polished and measures 8.125" long overall and the blade measures 3.625" long. Has a tapered tang. Tak Fukuta...

This is a knife blade blank made by Tak Fukuta in Seki, Japan circa 1980s for Boker Magnum. The 440B Stainless blade is a hefty 3/16" thick and is mirror polished and measures 8.125" long overall and the blade measures 3.625" long. Has a tapered tang...

This knife blade blank was made by Tak Fukuta in Seki, Japan for the Italian company, Virginia, circa 1980s. It features a chipflint finished blade. Ready for you to complete a custom knife. Tak Fukuta was the first Japanese member of the American Knife...

This knife blade blank was made by Tak Fukuta in Seki, Japan for United circa 1980s. It features a chipflint finished blade. Ready for you to complete a custom knife. Tak Fukuta was the first Japanese member of the American Knife Maker's Guild, and...

This is a knife blade blank made by Tak Fukuta in Seki, Japan circa 1990s. This blank measures 7.25" long overall and the blade measures 3.25" long and is made of AUS-8A. Measures 0.91" thick. Tak Fukuta was the first Japanese member of the American...

This knife was made by Hattori for Kershaw circa 1980s but remained unfinished. It features a 0.165" thick stainless steel blade. A rare chance to own a part of Kershaw history and produced by one of Seki's most renowned makers. This blade is tempered...

This knife was made by Hattori for Al Mar circa 1980s but remained unfinished. It is stamped Seki-Japan and features a 0.138" thick AUS6 stainless steel blade and a tapered tang handle. A rare chance to own a part of Al Mar history and produced by one of...

This is a knife blade blank made by Tak Fukuta in Seki, Japan for Rigid circa 1980s. It measures 9.25" long overall and the blade measures 4.6" long. Some have the Japan tang stamp on back and others do not. Tak Fukuta was the first Japanese member of...

This is beautiful bowie knife blade blank made by Tak Fukuta in Seki, Japan for Parker's 1986 Statue of Liberty commemorative bowie. It measures 15" long overall and the blade measures 10" long and is made of mirror polished 3/16" thick Stainless Steel...

This vintage Batman knife was made in Seki Japan circa 1970s. It has black stainless blades and handle and measures 3.5" from tip of blade to end of hilt. A recent find from the original distributor in Seki, Japan...

This is the Haller push dagger, made in Seki, Japan circa 1980s for the retail market in Germany (this one is missing the Haller etch on the front side or it may be faint). Believed to be made by either Tak Fukuta or Seizo Imai. This knife features a...

This vintage survival tool was made in Seki, Japan circa 1980s by Hasegawa Cutlery Co. It comes with a sheath cover and in the box. Specs Brand/Model: Hasegawa Survival Knife Made...

This vintage prototype survival tool was made in Seki, Japan circa 1980s for Fury. This one is sterile (missing branding etch) but is identical to the others we are offering with the etch. It comes with a sheath cover and lanyard hole in handle...

This vintage survival tool was made in Seki, Japan circa 1980s by Hasegawa Cutlery Co. It features many tool functions with a blade edge and has a lanyard hole in handle. It comes with a sheath cover and in the box...

This vintage survival tool was made in Seki, Japan circa 1980s by Hasegawa Cutlery Co. It features many tool functions with a blade edge and has a lanyard hole in handle. It comes with a sheath cover and in the box...

This vintage survival tool was made in Seki, Japan circa 1980s by Hasegawa Cutlery Co. It features many tool functions with a blade edge and has a lanyard hole in handle. It comes with a sheath cover and in the box...