Vintage

This vintage knife was made in Seki Japan circa 1980s by Seizo Imai for Parker. Seizo Imai was one Seki, Japan's finest craftsmen and most famous knifemakers of the modern era. His collaboration with Parker spanned nearly two decades. He made knives for...

This stunning ornate folder was made by Tak Fukuta in Seki, Japan for Parker circa 1980s. It has stainless steel blades and smooth bone handle. Tak Fukuta was the first Japanese member of the American Knife Maker's Guild, and apprentice to Bob Loveless...

This vintage knife was made in Seki Japan circa 1980s by Seizo Imai for Parker. This Canoe features a smooth bone handle and brass bolsters. Comes in the box. Seizo Imai was one Seki, Japan's finest craftsmen and most famous knifemakers of the modern era...

This vintage knife was made in Seki Japan circa 1950s. This one is not marked S.M.Z. like the others we are offering, but it is otherwise identical. It has a stainless blade and buffalo horn handle and measures 4.25" when closed. A recent find from a...

This vintage knife was made in Seki Japan circa 1950s. It has a stainless blade and buffalo horn handle and measures 4" when closed. A recent find from a closed knife distributor warehouse in Seki, Japan. Specs Brand/Model: S. M. Z...

This vintage knife was made in Seki Japan circa 1950s. It has a stainless blade and buffalo horn handle and measures 4" when closed. A recent find from a closed knife distributor warehouse in Seki, Japan. Specs Brand/Model: S. M. Z...

This vintage knife was made in Seki Japan circa 1950s. It has a stainless blade and buffalo horn handle and measures 4.25" when closed. A recent find from a closed knife distributor warehouse in Seki, Japan. Specs Brand/Model: S. M. Z...

This vintage knife was made in Seki Japan circa 1950s. It has a stainless blade and buffalo horn handle and measures 4.25" when closed. A recent find from a closed knife distributor warehouse in Seki, Japan. Specs Brand/Model: S. M. Z...

This knife blade was made by Hattori circa 1970s for G96. It features a sturdy 0.173" thick stainless steel blade. A rare chance to own a part of Seki knife making history and produced by one of Seki's most renowned makers. Recently found in the Hattori...

This hunting knife blade blank was made by Tak Fukuta in Seki, Japan for Parker circa 1980s. it is made of stainless steel. Tak Fukuta was the first Japanese member of the American Knife Maker's Guild, and apprentice to Bob Loveless. He hand crafted fine...

This is a knife blade blank made by Tak Fukuta in Seki, Japan circa 1990s. This blank measures 7.25" long overall and the blade measures 3.25" long and is made of AUS-8A. Measures 0.91" thick. Tak Fukuta was the first Japanese member of the American...

This knife blade blank was made by Tak Fukuta in Seki, Japan circa 1980s, originally for Magnum and Tak Blade. It is made of 0.146" stainless steel. Tak Fukuta was the first Japanese member of the American Knife Maker's Guild, and apprentice to Bob...

This knife blade blank was made by Tak Fukuta in Seki, Japan circa 1980s, most likely for Explorer. It is perfect for a small knife, measuring 5" long overall with a 1.75" long blade. Made of 1/8" stainless steel. Blade is flat and will need ground. Tak...

This knife was made by Tak Fukuta in Seki, Japan circa 1980s for Explorer. It features an all stainless construction. The sheath is not original for this model, but it works well, with the blade going in on the bottom and then easily pulling up on the...

This is the Colt CT7, made by Tak Fukuta in Seki, Japan for Colt circa 1980s. It features a mirror polished stainless steel blade with serrations and guthook. Blade only, no guard. Tak Fukuta was the first Japanese member of the American Knife Maker's...

This is the Colt CT7, made by Tak Fukuta in Seki, Japan for Colt circa 1980s. It features a mirror polished stainless steel blade with guthook. Blade only, no guard. Tak Fukuta was the first Japanese member of the American Knife Maker's Guild, and...

This knife blade blank was made by Tak Fukuta in Seki, Japan circa 1980s for Winchester. The Stainless blade is a hefty 3/16" thick and is mirror polished and measures 8.125" long overall and the blade measures 3.625" long. Has a tapered tang. Tak Fukuta...

This knife blade blank was made by Tak Fukuta in Seki, Japan circa 1980s for Winchester. The Stainless blade is a hefty 3/16" thick and is mirror polished and measures 8.125" long overall and the blade measures 3.625" long. Has a tapered tang. Tak Fukuta...

This knife blade blank was made by Tak Fukuta in Seki, Japan circa 1980s for Winchester. The Stainless blade is a hefty 3/16" thick and is mirror polished and measures 8.125" long overall and the blade measures 3.625" long. Has a tapered tang. Tak Fukuta...

This is a knife blade blank made by Tak Fukuta in Seki, Japan circa 1980s for Boker Magnum. The 440B Stainless blade is a hefty 3/16" thick and is mirror polished and measures 8.125" long overall and the blade measures 3.625" long. Has a tapered tang...

This knife blade blank was made by Tak Fukuta in Seki, Japan for the Italian company, Virginia, circa 1980s. It features a chipflint finished blade. Ready for you to complete a custom knife. Tak Fukuta was the first Japanese member of the American Knife...

This knife blade blank was made by Tak Fukuta in Seki, Japan for United circa 1980s. It features a chipflint finished blade. Ready for you to complete a custom knife. Tak Fukuta was the first Japanese member of the American Knife Maker's Guild, and...

This is a knife blade blank made by Tak Fukuta in Seki, Japan circa 1990s. This blank measures 7.25" long overall and the blade measures 3.25" long and is made of AUS-8A. Measures 0.91" thick. Tak Fukuta was the first Japanese member of the American...

This is the Seaman's Thumb, made in Seki, Japan circa 1980s by Tak Fukuta for Ka-Bar. It features the original Olean, NY tang stamp with stainless steel blade and stainless handle (would normally have been finished with scrimshawed handle scales)...